Hydrotool: Cranes, valves, manometers

 634300AThe crane is safetyThe valve is installed in system of a drainage of a hydrotank and serves for protection of a hydrotank from possible prevysheniye of working pressureTechnical characteristics: Working environment AMG-10 oilEnvironment airWorking pressure, kgf/cm2 1,8... 2,2t of...

H4100-241M1The valve is demountableThe crane throttle is installed in a control system of a forward wheel and serves for a mix perepuskaniye between cylinders of the left and right turn.Technical characteristics: Working environment AMG-10 oilEnvironment air Working pressure, kgf/cm2 150t...

H5810-25MMThe valve is reducingThe crane perekryvny serves for charging of emergency brake system.Technical characteristics: Working environment AMG-10 oilWorking pressure, kgf/cm2 150 Effort of turn of the handle of 10 kg no moreWeight, kg 0,71 

NU5804-0Safety valveThe crane serves for a perepuskaniye of working liquid between cylinders of the right and left turnTechnical characteristics: Working environment AMG-10 oilEnvironment air Working pressure, kgf/cm2 210t of working and surrounding environments, 0C-50... +100Course of a...

NU5810-40M1Lattice with the filterThe crane serves for management of landing gear extension and cargo hatchesTechnical characteristics: Working environment AMG-10 oilEnvironment air Working pressure, kgf/cm2 5t of working and surrounding environments, 0C-60... +60Weight, kg 0,55Overall...

Crane of perekryvnyThe crane of the manometer is intended for installation in hydraulic systems of the plane and serves for turning on of the control manometer. Technical characteristics: Working environment state standard specification 6794-75 AMG-10 oilWorking pressure, kgf/cm2...

T5312-50ASwitching valve The crane drain for oil serves for discharge of oil from an oil systemTechnical characteristics: Working environment AMG-10 oilWorking pressure, kgf/cm2 0,75Moment of turn of the handle 15kgsmWeight, kg 0,5

GA-74M/5 The crane on-off with electromagnetic management SOLENOID OPERATED TWO-POSITION VALVE GA-74M/5 Control and hydraulic system Control system and hydraulic system Note:1. Positions with # are established in shop letno of test service.2. At not installation of a product the...

8AMT-6840-00-01/02 Screen and exhaust device EXHAUST-HEAT SUPPRESSORS 8AMT-6840-00-01/02 The list of the additional equipment installed on the MI-171E helicopter (The list of optional equipment mounted on Mi-171E helicopter) Note:1. Positions with # are established in shop letno of test...

629600BTThe crane of management for hydraulicsThe crane is intended for control of hydraulic mechanisms (cylinders, hydromotors)

629600BThe crane is distributive three-positionThe crane is intended for control of hydraulic mechanisms (cylinders, hydromotors)

629600The crane of management for hydraulicsThe crane is intended for control of hydraulic mechanisms (cylinders, hydromotors)

142-5810-300Crane of perekryvnyThe valve perekryvny manual route management is intended for turning on of the drive of a mobile floor.Technical characteristics: Working environment - state standard specification 6794-75 AMG-10 oilRange of operational temperatures from minus-50 to +60...

154.00.5855.000Cable-operated craneThe cable-operated crane is intended for control of the cylinder of unilateral action.Technical characteristics: Nominal diameters of sections through passage of Pressure and Modular unions - Du of =10 mm, the union "Discharge" - Du of =6 mm.The working...

4N5517-0The crane is rotaryThe crane rotary the forward chassis is installed in a hydraulic system and is intended for managementforward chassis. Technical characteristics:Working environment AMG-10GOST 6794-75 oilWorking pressure 210kgs/cm2Environment airRange of working temperatures,...